Product Search
WIND AND HYDRO
NOTE:
Products for wind or hydro
MNSTOPSWITCH
(Previous Model Num: MN-Stop-Switch Wind and Hydro)
Stop Switch for wind turbines 63 amp 150 VDC.
Price: $212.00
CLASSIC 150
The Classic 150 MPPT Charge Controller is MidNite Solar's most popular model. It has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 150 has a maximum output current of 96 amps, an operating voltage of 150 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 150 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

Classic Sizing Tool
The Classics (PDF Presentation)
Price: $925.00
CLASSIC 200
The Classic 200 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 200 has a maximum output current of 79 amps, an operating voltage of 200 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 200 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

Classic Sizing Tool
The Classics (PDF Presentation)
Price: $925.00
CLASSIC 250
The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 250 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

Classic Sizing Tool
The Classics (PDF Presentation)
Price: $1050.00
MNCLIP1.5KAC0X.X
1,500 watt AC Clipper for wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values per phase to allow you to tailor it to your specific turbine.

Generally speaking if your turbine has larger than a 6 foot rotor diameter and or is rated for 1KW or more you may need the 4KW clipper. Please consult tech support


Please call Tech Support to verify your particular needs before ordering a Clipper from the Turbine Matrix as each system is different.
Price: $2150.00
MNCLIP4KACX.X
4,000 watt AC Clipper for wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values per phase to allow you to tailor it to your specific turbine.


Generally speaking if your turbine has larger than a 10 foot rotor diameter and or is rated for 2.5KW or more you may need more than one clipper. Please consult tech support


Please call Tech Support to verify your particular needs before ordering a Clipper from the Turbine Matrix as each system is different.
Price: $2530.00
MNCLIP1.5KDC2.4
1,500 watt DC Clipper for Wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values per phase to allow you to tailor it to your specific turbine.

Generally speaking if your turbine has larger than a 6 foot rotor diameter and or is rated for 1KW or more you may need the 4KW clipper. Please consult tech support


Please call Tech Support to verify your particular needs before ordering a Clipper from the Turbine Matrix as each system is different.
Price: $2195.00
MNCLIP4KDCX.X
4,000 watt DC Clipper for wind or Hydro designed to work with the MidNite Classic. The Clipper comes in different resistance values to allow you to tailor it to your specific turbine.

Generally speaking if your turbine has larger than a 10 foot rotor diameter and or is rated for 2.5KW or more you may need more than one clipper. Please consult tech support


Please call Tech Support to verify your particular needs before ordering a Clipper from the Turbine Matrix as each system is different.
Price: $2665.00
MNCRP
Replacement Resistor package for the AC and DC 4KW clippers. The resistor pack comes with the Fan and 2 Temperature based switches (one for Fan and one for the Fail Safe). You must specify AC or DC and the proper ohms as well.
If the Clipper was built before July of 2012 contact customer service for compatibility
Price: $999.00