Breakers
MNDC-GFP80
NON POLARIZED
|
Model
|
Size
|
Weight
|
|
MNDC-GFP80
|
1 1/2" wide, 1/4" studs for Electrical connection
|
1 lbs
|
|
Model
|
MNDC-GFP80
|
|
Size
|
1 1/2" wide, 1/4" studs for Electrical connection
|
|
Weight
|
1 lbs
|
DESCRIPTION:
80 amp 150VDC panel mount DC ground fault protector (NRTL listed breaker assy)
1/2 amp trip mechanism connects between battery negative and earth ground
NEC2008 requires DC-GFP's on all solar installations.
10,000 AIC
10,000 AIC
MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
Breaker Torque Value: 30 In-Lbs (3.4NM)
All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
Breaker Torque Value: 30 In-Lbs (3.4NM)
- NON POLARIZED
- Width 1.5 inches (39mm)
- Environmental Rating - Type 1 (Indoor)
- Listed for US & Canada
California Residents: Warning
ACCESSORIES
MNDC-C-SERIES
This is a MNDC with adapter attached for the smaller panel mount breakers (3/4 inch MNEDC panel mount breaker not included).
This is a MNDC with adapter attached for the smaller panel mount breakers (3/4 inch MNEDC panel mount breaker not included).
MNDC15
General use enclosure for 15 panel mount type breakers from 5 - 100 Amp as well as a single 125, 175 or 250 amp breaker if so desired.
General use enclosure for 15 panel mount type breakers from 5 - 100 Amp as well as a single 125, 175 or 250 amp breaker if so desired.
MNDC125
White powder coated aluminum with 125A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum with 125A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC175
White powder coated aluminum chassis with 175A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum chassis with 175A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC250
White powder coated aluminum chassis with 250A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum chassis with 250A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC125PLUS
MNDC Plus version of the popular MNDC
MNDC Plus version of the popular MNDC
MNDC175PLUS
MNDC Plus version of the popular MNDC.
MNDC Plus version of the popular MNDC.
MNDC250PLUS
MNDC Plus version of the popular MNDC.
MNDC Plus version of the popular MNDC.
MNDC175-X2
MNDC175-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 175A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC175-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 175A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC250-X2
MNDC250-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 250A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC250-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 250A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNEDCQUAD
General use aluminum enclosure for 4 panel mount type breakers from 5 - 100 Amp.
General use aluminum enclosure for 4 panel mount type breakers from 5 - 100 Amp.