Combiners - Disconnecting
MNPV4HV-DISCO 3R-DLX
(Previous Model Num: MNPV4HV-Disco 3R - Deluxe)
|
Model
|
Price
|
Size
|
Shipping
|
Weight
|
|
MNPV4HV-DISCO 3R-DLX
|
$824.00
|
13.7"L x 10.4"W x 4.4"D INCLUDING HANDLE
|
19"L x 16"W x 5"D
|
10 lbs
|
|
Model
|
MNPV4HV-DISCO 3R-DLX
|
|
Price
|
$824.00
|
|
Size
|
13.7"L x 10.4"W x 4.4"D INCLUDING HANDLE
|
|
Shipping
|
19"L x 16"W x 5"D
|
|
Weight
|
10 lbs
|
DESCRIPTION:
MNPV4HV-DISCO 3R-DLX Disconnecting Combiner has 80 amp busbars, 100 amp load break rated switch and a third pole which is the feedback micro switch, 600 volt max.
The MNPV4HV-DISCO 3R-DLX's red handle is LOCKABLE IN THE OFF POSITION!
Read PDF on the Discos
- Type 3R aluminum enclosure (no rust, won't turn to dust)
- 90o C terminals
- See thru deadfront & color coded busbar guards included
- Current Rating - 80A
- Output Circuits - 1
- Max. Output Wire Size - 1/0
- Load Break Rated
- Four Fuseholders (MNTS) installed. To receive 20 amp fuses use this part number: MNPV4HV-DISCO 3R-DLX-20
- Four 15a/600v fuses installed
- Warranty - 5 yrs.
- Listed by ETL for US
- Made in the USA
- Four 1/2 inch strain reliefs with locknuts (MNSR-1000)
- One 10-32 X 7/8" BOLT and locknut
- One TERMINAL PIN 18-22 AWG.
- One TERMINAL PIN 10-12 AWG.
- One RING TERMINAL 10-12 AWG.
- One BLUE WRENCH
- One MNSPD-600 (Surge Protection Device)
Read PDF on the Discos
California Residents: Warning
ACCESSORIES
MNCAT5-600 - $2.25 per ft.
Cat-5 cable to connect disconnecting combiners and arc fault combiners to the Birdhouse.
Cat-5 cable to connect disconnecting combiners and arc fault combiners to the Birdhouse.
MNCAT5-600-FULLROLL - $2285.00
Cat-5 cable to connect disconnecting combiners and arc fault combiners to the Birdhouse in a 1600ft roll.
Cat-5 cable to connect disconnecting combiners and arc fault combiners to the Birdhouse in a 1600ft roll.
MNTS-12PK - $84.00
MNTS - Mersen Touch Safe Fuse Holder for10x38 mm fuses 1000VDC 30 amp Din rail mount Use in the MNPV combiners for high voltage string inverters. MNTS-12PK
MNTS - Mersen Touch Safe Fuse Holder for10x38 mm fuses 1000VDC 30 amp Din rail mount Use in the MNPV combiners for high voltage string inverters. MNTS-12PK
MN600FUSE - $3.75
Goes with MNTS fuse holder. The fuses are industry standard 10mm x 38mm fuses.
Goes with MNTS fuse holder. The fuses are industry standard 10mm x 38mm fuses.
MNSR-1000-25PK - $74.50
This 1/2 in 1000V Heyco Strain Relief accepts two 6mm PV wires. Nut is included.
This 1/2 in 1000V Heyco Strain Relief accepts two 6mm PV wires. Nut is included.