Product Search
E-Panel - SMA
Back to E-Panel - SMA
Printer Friendly Version
MNE250SMA-3PH MASTER
Model
Price
Shipping
Weight
MNE250SMA-3PH MASTER
$1,682.00
25"L x 23"W x 14"D
40 lbs
Model
MNE250SMA-3PH MASTER
Price
$1,682.00
Shipping
25"L x 23"W x 14"D
Weight
40 lbs
Model Options
Model
Price
Shipping
Weight
Description
MNE250SMA-3PH MASTER-E
$1,682.00
25"L x 23"W x 14"D
40 Lbs.
The MNE250SMA-3PH MASTER-E is our Export version. It is the same E-Panel but with the proper color wires and proper breakers for a 230v 50hz inverter.
Model Options
Model
MNE250SMA-3PH MASTER-E
Price
$1,682.00
Shipping
25"L x 23"W x 14"D
Weight
40 Lbs.
Description
The MNE250SMA-3PH MASTER-E is our Export version. It is the same E-Panel but with the proper color wires and proper breakers for a 230v 50hz inverter.
DESCRIPTION:
The MNE250SMA-3PH Master E-Panel works with 2 of the MNE250SMA-Slave E-Panels to create a 3 phase system. The MNE250SMA-3PH 3 phase master includes the 3 phase 60amp input/output bypass system. This E-Panel can be used in conjunction with a Sunny Island inverter as part of a 3 phase off-grid, battery backup or AC Coupled system. Terminals are provided for hookup to leg 2 and leg 3 E-Panels. Comes with 250A battery disconnect breaker and inverter cables. Pre-wired with AC input and output wiring for leg 1 (master) inverter. (Two slaves are also required for 3 phase.)
Master E-Panel in a 3 phase system.
Two slaves are also required for 3 phase.

The 3 phase master includes the 3 phase 60amp input/output bypass system. This E-Panel can be used in conjunction with a Sunny Island inverter as part of a 3 phase off-grid, battery backup or AC Coupled system. Terminals are provided for hookup to leg 2 and leg 3 E-Panels. Comes with 250amp battery disconnect breaker and inverter cables. Pre-wired with AC input and output wiring for leg 1 (master) inverter. (Two slaves are also required for 3 phase.)

This E-Panel does not come with a relay board, RS485 (485USPD-NR) boards or MNSPD lightning protection. RS485 boards are required when AC Coupling to SunnyBoy inverters if 3 stage charging is desired. One RS485 board goes into the master inverter and each SunnyBoy Inverter. AC Coupling to a SunnyBoy or any other grid-tie inverter is possible without RS485 boards. The Sunny Island inverter will frequency shift based on battery voltage to knock the grid-tie inverter off line. SunnyBoy inverters can switch between off-grid and grid-tie mode automatically when RS485 boards are used. To program this feature you must use either SMA service cable (USBPBS) or SMA web box (SUNNYWEBBOXU).

NOTE: A back plate is recommended for the proper wiring alignment of the Sunny Island.
  • Environmental Rating - Type 1 (Indoor)
  • 60amp, 3 phase AC output/bypass assembly
  • 3 phase AC input and output breakers
  • 2 Extra spaces on the face to the Left of the main battery breaker for the white bodied (MNEACQZD) CBI Din Rail breakers
  • 4 Extra spaces on the face to the Right of the main battery breaker for the black bodied (MNEAC or MNEPV) CBI Din Rail breakers
  • 4 Spaces on the left side and 6 spaces on the right side of the chassis for the Panel mount 3/4 inch breakers (MNEDC)
  • 500A/50mV shunt (MNSHUNT)
  • Neutral, Ground, AC IN, AC OUT and Slave busbars
  • 250amp battery breaker with inverter cables
  • AC wiring to inverter.
  • Warranty - 5 yrs.
  • Listed by ETL for US & Canada
  • Made in the USA

California Residents: Warning

ACCESSORIES
CLASSIC 150 - $925.00
The Classic 150 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B

CLASSIC 200 - $925.00
The Classic 200 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B

CLASSIC 250 - $1050.00
The Classic 250 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B

MNSPD-300-DC - $135.00
The MidNite Solar 300V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.

MNBE-D - $1125.00
Our Best Value! Battery Enclosure with locking door and two shelves. MNBE-D holds 8 GVX3050T or 8 golf cart or 8 group 31 batteries. With the optional third shelf, the MNBE-D holds 12 group 31 batteries.

MNESMAXW-SHORT BP - $344.00
SMA and XW short back plate for inverter and E-Panel.

MNBCM - $94.00
Battery Capacity Meter

MNEDC 5A thru 100A - $27.00
5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100 amp 150VDC Panel Mount. 10,000 AIC

MNEPV BREAKERS - $22.00
150VDC din rail mount breaker available in 1 to 63 amps (13mm wide).

MNEDC-300 30A thru 80A - $54.00
30, 60 or 80 Amp 300 VDC panel mount breaker. 10,000 AIC

MNBCB 1000/50 - $1134.00
MidNite 1000amp Battery combiner box. Useful for dual Radian inverters or multiple Sunny Island inverters as well as for combining multiple strings of batteries.

MNXFLEX2/0
2/0 Cobra X-Flex battery cable with tin plated lugs and glue filled white or red heat shrink. UL Listed.

MNXFLEX4/0
4/0 Cobra X-Flex battery cable with tin plated lugs and glue filled white or red heat shrink. UL Listed.

MNXFLEX2AWG
2 AWG Black UL Listed Cobra X-Flex battery cable.