Combiners - Pre-Wired
MNPV4-MC4
|
Model
|
Price
|
Size
|
Shipping
|
Weight
|
|
MNPV4-MC4
|
$396.00
|
13.5"L x 8"W x 3.5"D
|
11"L x 5"W x 4"D
|
5 lbs
|
|
Model
|
MNPV4-MC4
|
|
Price
|
$396.00
|
|
Size
|
13.5"L x 8"W x 3.5"D
|
|
Shipping
|
11"L x 5"W x 4"D
|
|
Weight
|
5 lbs
|
DESCRIPTION:
This 3R pre-wired MNPV4 combiner is rated for outdoor use. Designed for combining high voltage strings using standard 10mm x 38mm fuses up to 80 amps total.
The Pre-wired MNPV4 combiner is rated for outdoor use. Designed for combining high voltage strings using 10mm x 38mm fuses up to 80 amps total. The use of touch safe din rail mount fuse holders (
MNTS) and fuses allow operation up to 600 Volts. The MNPV4 is rated for up to 80 amps.
INCLUDED FEATURES
INCLUDED FEATURES
- Type 1 environmental rating
- Fast, Convenient hook up with industry standard connectors
- All aluminum powder coated housing that won't rust
- Flip up cover that can stay in the open position during installation
- PV Negative bus bar with #6 and 1/0 connections
- Chassis ground bus bar with #6 and 1/0 connections
- Standard DIN rail with (x) 30 amp touch safe fuse holders. 15 amp fuses included
- Tin plated copper bus bar that connect PV Plus outputs
- Dead front cover (MNPV6DF) snaps into place after wiring is complete for safety
- Connectors for PV in and PV out on bottom, additional knockouts on bottom and sides
- Top surface is available to bring conduit in from directly above the enclosure
- Warranty - 5 yrs.
- Listed by ETL for US & Canada
- Made in the USA
California Residents: Warning
ACCESSORIES
MNSPD-600 - $135.00
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.