E-Panel - Schneider Electric XW
CLASSIC 200
Model
|
Price
|
Size
|
Shipping
|
Weight
|
CLASSIC 200
|
$925.00
|
14.9"L x 6"W x 4"D
|
19"L x 8.5"W x 6"D
|
12 lbs
|
Model
|
CLASSIC 200
|
Price
|
$925.00
|
Size
|
14.9"L x 6"W x 4"D
|
Shipping
|
19"L x 8.5"W x 6"D
|
Weight
|
12 lbs
|
DESCRIPTION:
The Classic 200 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 200 has a maximum output current of 79 amps, an operating voltage of 200 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 200 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.
Classic Sizing Tool
The Classics (PDF Presentation)
Classic Sizing Tool
The Classics (PDF Presentation)
For more information: Classic Landing Pages
FEATURES:
Ships with MidNite Battery Temperature Sensor (MNBTS) and printed Manual.
FEATURES:
- Charges Lithium, Flooded Lead Acid, AGM and virtually any other chemistry.
- 200 operating voltage
- Max current out: 79 amps
- ETL listed to UL1741 and CSA
- Terminals are rated for 75 C
- Type 1 environmental rating
- Exclusive HyperVOC extends VOC limits
- 12-72V battery
- Built in DC-GFP and Arc Fault
- Detector
- Solar, wind and hydro MPPT modes
To ensure proper start up and MPPT operation, the minimum initial PV input voltage should be at least 30% higher than the highest expected battery voltage.
Check out the Classic Power Rating ChartsShips with MidNite Battery Temperature Sensor (MNBTS) and printed Manual.
MidNite Solar offers an industry first, an extended warranty for all the Classic MPPT charge controllers. Six months prior to the end of the warranty period customers can ship their Classic back to MidNite Solar with a check for $147 dollars plus shipping and we will replace any wearable parts and do a general tune-up. This will extend the warranty by 2 additional years, another good reason to purchase a Classic.
- Warranty - 5 yrs.
- Listed by ETL for US & Canada
- CE Certified Listed
- FCC Class B Listed
- Made in the USA
California Residents: Warning
ACCESSORIES
Classic Replacement Power Boards - $470.00
Replacement FET Boards for the Classic, Classic-SL and Classic Lite.
Replacement FET Boards for the Classic, Classic-SL and Classic Lite.
Classic Replacement Control Boards - $350.00
Classic 150, 200, 250 replacement control board
Classic 150, 200, 250 replacement control board
Local Application
The MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet.
The MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet.
MyMidNite
My MidNite, our free, secure service allows you to view your Classic(s) when you are away from home.
My MidNite, our free, secure service allows you to view your Classic(s) when you are away from home.
MNWBJR - $81.00
The Whiz Bang Jr is a current sense module that attaches to the standard 50mv / 500A Shunt and wires into the Classic and KID charge controllers to give Amperage readings from the shunt. To use the Whizbang Jr (MNWBjr) with any of the Classic Lites, you will either need the local app or an MNGP.
The Whiz Bang Jr is a current sense module that attaches to the standard 50mv / 500A Shunt and wires into the Classic and KID charge controllers to give Amperage readings from the shunt. To use the Whizbang Jr (MNWBjr) with any of the Classic Lites, you will either need the local app or an MNGP.
MNGP - $225.00
MidNite Graphics Panel (Graphics display)
MidNite Graphics Panel (Graphics display)
MNSPD-300-DC - $135.00
The MidNite Solar 300V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.
The MidNite Solar 300V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.
MNSPD-600 - $135.00
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.
MNEDC 5A thru 100A - $27.00
5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100 amp 150VDC Panel Mount. 10,000 AIC
5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100 amp 150VDC Panel Mount. 10,000 AIC
MNEPV BREAKERS - $22.00
150VDC din rail mount breaker available in 1 to 63 amps (13mm wide).
150VDC din rail mount breaker available in 1 to 63 amps (13mm wide).
MNEPV 80A or 100A - $65.00
80 or 100 amp Din rail mount breaker.
80 or 100 amp Din rail mount breaker.
MNEDC-300 30A thru 80A - $54.00
30, 60 or 80 Amp 300 VDC panel mount breaker. 10,000 AIC
30, 60 or 80 Amp 300 VDC panel mount breaker. 10,000 AIC
MNEPV-300 7A thru 50A - $46.00
7, 10, 12, 15, 20, 50 amp 300VDC din rail mount breaker. 10,000 AIC
Note: Branch circuit rated 489A
7, 10, 12, 15, 20, 50 amp 300VDC din rail mount breaker. 10,000 AIC
Note: Branch circuit rated 489A
MNEDCQUAD - $92.00
General use aluminum enclosure for 4 panel mount type breakers from 5 - 100 Amp.
General use aluminum enclosure for 4 panel mount type breakers from 5 - 100 Amp.
MNNWC3 - $10.75
3 foot cable for the MidNite network. Used to network MidNite products together.
3 foot cable for the MidNite network. Used to network MidNite products together.
MNCCB-L or MNCCB-R - $26.00
CHARGE CONTROL BRACKETS - Right/Left - Right or left hand charge control brackets. Fits OutBack, Xantrex and MidNite MPPT controllers.
CHARGE CONTROL BRACKETS - Right/Left - Right or left hand charge control brackets. Fits OutBack, Xantrex and MidNite MPPT controllers.
MNCLASSIC FAN KIT - $54.00
These are replacement fans for use in the repair of the classic with a damaged or worn out fan.
These are replacement fans for use in the repair of the classic with a damaged or worn out fan.