Combiners - Pre-Wired
MNDC-GFP63
POLARIZED
Model
|
Price
|
Size
|
Weight
|
MNDC-GFP63
|
$88.00
|
Width 1 inch (26mm)
|
1 lbs
|
Model
|
MNDC-GFP63
|
Price
|
$88.00
|
Size
|
Width 1 inch (26mm)
|
Weight
|
1 lbs
|
DESCRIPTION:
63 amp 150VDC din rail mount DC ground fault protector (NRTL listed breaker assy).
NEC2008 requires DC-GFP's on all solar installations.
10,000 AIC
NEC2008 requires DC-GFP's on all solar installations.
10,000 AIC
MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
Breaker Torque Value: 20 In-Lbs (2.3NM)
All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
Breaker Torque Value: 20 In-Lbs (2.3NM)
- POLARIZED
- Width 1 inch (26mm)
- Wire Size: 14 to 6 AWG
- Environmental Rating - Type 1 (Indoor)
- Listed for US & Canada when used in MidNite Solar enclosures
California Residents: Warning
ACCESSORIES
MNDC-C-SERIES - $262.00
This is a MNDC with adapter attached for the smaller panel mount breakers (3/4 inch MNEDC panel mount breaker not included).
This is a MNDC with adapter attached for the smaller panel mount breakers (3/4 inch MNEDC panel mount breaker not included).
MNDC125 - $310.00
White powder coated aluminum with 125A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum with 125A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC175 - $360.00
White powder coated aluminum chassis with 175A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum chassis with 175A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC250 - $360.00
White powder coated aluminum chassis with 250A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum chassis with 250A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC125PLUS - $380.00
MNDC Plus version of the popular MNDC
MNDC Plus version of the popular MNDC
MNDC175PLUS - $425.00
MNDC Plus version of the popular MNDC.
MNDC Plus version of the popular MNDC.
MNDC250PLUS - $425.00
MNDC Plus version of the popular MNDC.
MNDC Plus version of the popular MNDC.
MNDC175-X2 - $740.00
MNDC175-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 175A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC175-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 175A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC250-X2 - $740.00
MNDC250-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 250A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC250-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 250A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNBABYBOX - $59.00
General use powder coated aluminum enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution.
General use powder coated aluminum enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution.
MNBIGBABY - $71.00
General use enclosure - holds up to 4 13mm wide din rail breakers from 1-63 amps.
General use enclosure - holds up to 4 13mm wide din rail breakers from 1-63 amps.