Product Search
Breakers
Back to Price List
Printer Friendly Version
MNEPV 80A or 100A
POLARIZED
MNEPV80, MNEPV100
Model
Price
Size
Weight
MNEPV 80A or 100A
$65.00
Width 1 inch (26mm) Wire size up to 2 AWG
1 lbs
Model
MNEPV 80A or 100A
Price
$65.00
Size
Width 1 inch (26mm) Wire size up to 2 AWG
Weight
1 lbs
Model Options
Model
Price
MNEPV80
$65.00
Model
Price
MNEPV100
$65.00
Model Options
Model
MNEPV80
Price
$65.00
Model
MNEPV100
Price
$65.00
DESCRIPTION:
80 or 100 amp Din rail mount breaker.
10,000 AIC.
MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.

Read about the 165 VDC ETL TEST STORY

MNEPV breakers are the same as CBI QY breakers except the standard used is inadequate for the solar industry. MidNite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. All of the NRTL listings still apply. Breakers ordered under the CBI part numbering system will not be listed for 150VDC and in many cases are not suitable for the solar industry.
Accepts up to #2 wire.
Breaker Torque Value: 20 In-Lbs (2.3NM)

All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.
  • POLARIZED
  • Width 1 inch (26mm)
  • Environmental Rating - Type 1 (Indoor)
  • Listed for US & Canada when used in MidNite Solar enclosures
A case contains 4 breakers.

California Residents: Warning

ACCESSORIES
MNDC-C-SERIES - $262.00
This is a MNDC with adapter attached for the smaller panel mount breakers (3/4 inch MNEDC panel mount breaker not included).

MNDC125 - $310.00
White powder coated aluminum with 125A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.

MNDC175 - $360.00
White powder coated aluminum chassis with 175A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.

MNDC250 - $360.00
White powder coated aluminum chassis with 250A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.

MNDC125PLUS - $380.00
MNDC Plus version of the popular MNDC

MNDC175PLUS - $425.00
MNDC Plus version of the popular MNDC.

MNDC250PLUS - $425.00
MNDC Plus version of the popular MNDC.

MNDC175-X2 - $740.00
MNDC175-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 175A/125VDC battery breakers out each side for disconnecting two sources or loads.

MNDC250-X2 - $740.00
MNDC250-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 250A/125VDC battery breakers out each side for disconnecting two sources or loads.

MNBABYBOX - $59.00
General use powder coated aluminum enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution.

MNBIGBABY - $71.00
General use enclosure - holds up to 4 13mm wide din rail breakers from 1-63 amps.