|
A:• Ensure the MNGP is plugged in using the blue display cable in the
top jack of the main circuit board.
• Verify you have an MNGP and not an MNLP. The MNLP is an LED
panel that comes with the Classic Lite and does not need to be
updated.
• When the black box pops up telling you to power the Classic up,
Count to 4 before turning the breaker on.
• If you do not have a breaker or disconnect and you are trying to
connect a wire to a terminal block or a battery, the connection
will likely be too dirty for the boot loader. Install the proper
breakers.
|
