Back to Documents
DOCUMENTS - Combiners - Disconnecting
MNPV6-Disco
This 3R MNPV6 DISCO combiner is one in a series of disconnecting PV combiners from MidNite Solar. This model holds up to 6 poles of our common MNEPV and or MNEAC CBI breaker. This model will support several different configurations.
MNPV6-250 DISCO
This 3R MNPV6-250 DISCO combiner is one in a series of disconnecting PV combiners from MidNite Solar. This model includes the buss-bar to use up to 3 of our 300 volt DC breakers as a 3 string DC combiner.
MNPV4HV-DISCO 3R-BSC
MNPV4HV-DISCO 3R-BSC Disconnecting Combiner has 80 amp busbars, 100 amp load break rated switch has two poles in series.
MNPV4HV-DISCO 3R-DLX
Deluxe Disconnecting Combiner has 80 amp busbars, 100 amp load break rated switch and a third pole which is the feedback micro switch.
MNPV6HV-DISCO 4X
MNPV6HV-DISCO 4X PV Disconnecting Combiner, 3 poles, 125 amp busbars, 100 amp load break rated switch.
MNPV8HV-DISCO 3R
MNPV8HV-DISCO 3R PV Disconnecting Combiner, 5 poles, 80 or 160 amp busbars depending on how they are configured. Switch is a 100 amp load break rated or 175 amps load break rated depending on configuration.
MNPV8HV-DISCO 4X
MNPV8HV Disco 4X PV Disconnecting Combiner, 5 poles, 80 or 160 amp busbars depending on how they are configured. Switch is 100 amp load break rated or 175 amps depending on configuration.
MNPV16HV-DISCO 4X
MNPV16HV DISCO 4X PV Disconnecting Combiner, 5 poles, 100 amp load break rated or 175 amps load break rated for busbars and switch.
MNPV8HV-DLTL 4X
The MNPV8HV-DLTL 4X was specifically designed for the new dual channel MPPT on the transformer-less inverters.
MNPV8HV-DLTL 3R
The MNPV8HV-DLTL 3R was specifically designed for the new dual channel MPPT on transformer-less inverters.
MNPV16HV-DLTL 4X
The MNPVHV16-DLTL-4X was specifically designed for the new dual channel MPPT on the transformer-less inverters.
MNSOB3R-2P
MNSOB3R-2P is a disconnect switch. It has a 2 channel switch that breaks both the positive and negative of a PV string to a Transformer-less inverter.
MNSOB3R-4P
MNSOB3R-4P is a Disconnect switch. It has a 4 channel switch that breaks both the positive and negative of two isolated PV strings to a Transformer-less inverter.
MNSOB4X-2P
MNSOB4X-2P is a Disconnect switch. It has a 2 channel switch that breaks both the positive and negative of a PV string to a Transformer-less inverter.
MNSOB4X-4P
MNSOB4X-4P is a Disconnect switch. It has a 4 channel switch that breaks both the positive and negative of two isolated PV strings to a Transformer-less inverter.