DOCUMENTS - Wind and Hydro
MNChinook200
The Chinook 200 is a direct-drive micro-wind turbine designed for use in 12, 24 or 48 volt DC battery charging applications.
MNChinook200-M
The Chinook 200 is a direct-drive micro-wind turbine designed for use in 12, 24 or 48 volt DC battery charging applications.
MNSTOPSWITCH
Stop Switch for wind turbines 63 amp 150 VDC.
MNKID-HWB
The Wind/Hydro Kid is the industries only 30 amp charge controller designed specifically for wind and hydro
MNKID-HWBCX.X
The Wind/Hydro Kid is the industry's only 30 amp charge controller designed specifically for wind and hydro
CLASSIC 150
The Classic 150 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B
CLASSIC 200
The Classic 200 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B
CLASSIC 250
The Classic 250 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B
MNCDL300
MNCLIP1.5KAC0X.X
1,500 watt AC Clipper for wind or Hydro designed to work with the MidNite Classic.
MNCLIP4KACX.X
4,000 watt AC Clipper for wind or Hydro designed to work with the MidNite Classic.
MNCLIP1.5KDC2.4
1,500 watt DC Clipper for Wind or Hydro designed to work with the MidNite Classic.
MNCLIP4KDCX.X
4,000 watt DC Clipper for wind or Hydro designed to work with the MidNite Classic.