|
Model
|
Price |
Shipping |
Weight |
MNE250SMA-3PH MASTER
|
$1365.00 |
25"L x 23"W x 14"D |
40 Lbs |
|
MODEL OPTIONS
Model
|
Price |
Size |
Shipping |
Weight |
MNE250SMA-3PH MASTER-E
|
$1365.00
|
|
25"L x 23"W x 14"D
|
40 Lbs.
|
The MNE250SMA-3PH MASTER-E is our Export version. It is the same E-Panel but with the proper color wires and proper breakers for a 230v 50hz inverter.
|
MNE250SMA-3PH MASTER-RSS
|
$1614.00
|
|
|
|
Rapid Shut down compliant E-Panel. Includes Remote trip breaker upgrade, Battery disconnect module installed and tested to work with the Birdhouse and be 690.12 compliant. (REQUIRES Bird House, shown below in recommended accessories)
|
MNE250SMA-3PH MASTER-E-RSS
|
$1614.00
|
|
|
|
Rapid Shut down compliant E-Panel. Includes Remote trip breaker upgrade, Battery disconnect module installed and tested to work with the Birdhouse and be 690.12 compliant. (REQUIRES Bird House, shown below in recommended accessories)
|
|
|
Master E-Panel in a 3 phase system.
Two slaves are also required for 3 phase.
The 3 phase master includes the 3 phase 60amp input/output bypass system. This E-Panel can be used in conjunction with a Sunny Island inverter as part of a 3 phase off-grid, battery backup or AC Coupled system. Terminals are provided for hookup to leg 2 and leg 3 E-Panels. Comes with 250amp battery disconnect breaker and inverter cables. Pre-wired with AC input and output wiring for leg 1 (master) inverter. (Two slaves are also required for 3 phase.)
This E-Panel does not come with a relay board, RS485 (485USPD-NR) boards or MNSPD lightning protection. RS485 boards are required when AC Coupling to SunnyBoy inverters if 3 stage charging is desired. One RS485 board goes into the master inverter and each SunnyBoy Inverter. AC Coupling to a SunnyBoy or any other grid-tie inverter is possible without RS485 boards. The Sunny Island inverter will frequency shift based on battery voltage to knock the grid-tie inverter off line. SunnyBoy inverters can switch between off-grid and grid-tie mode automatically when RS485 boards are used. To program this feature you must use either SMA service cable (USBPBS) or SMA web box (SUNNYWEBBOXU).
NOTE: A back plate (MNESMA-Short BP or MNESMA-Tall-BP) is recommended for the proper wiring alignment of the Sunny Island.
- Environmental Rating - Type 1 (Indoor)
- 60amp, 3 phase AC output/bypass assembly
- 3 phase AC input and output breakers
- 2 Extra spaces on the face to the Left of the main battery breaker for the white bodied (MNEACQZD) CBI Din Rail breakers
- 4 Extra spaces on the face to the Right of the main battery breaker for the black bodied (MNEAC or MNEPV) CBI Din Rail breakers
- 4 Spaces on the left side and 6 spaces on the right side of the chassis for the Panel mount 3/4 inch breakers (MNEDC)
- 500A/50mV shunt (MNSHUNT)
- Neutral, Ground, AC IN, AC OUT and Slave busbars
- 250amp battery breaker with inverter cables
- AC wiring to inverter.
- Warranty - 5 yrs.
- Listed by ETL for US & Canada
- Made in the USA
California Residents: Warning
|
Description:
|
The MNE250SMA-3PH Master E-Panel works with 2 of the MNE250SMA-Slave E-Panels to create a 3 phase system. The MNE250SMA-3PH 3 phase master includes the 3 phase 60amp input/output bypass system. This E-Panel can be used in conjunction with a Sunny Island inverter as part of a 3 phase off-grid, battery backup or AC Coupled system. Terminals are provided for hookup to leg 2 and leg 3 E-Panels. Comes with 250A battery disconnect breaker and inverter cables. Pre-wired with AC input and output wiring for leg 1 (master) inverter. (Two slaves are also required for 3 phase.)
|
|
Recommended Accessories
|

|
CLASSIC 150 - $925.00
The Classic 150 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B
|
|

|
CLASSIC 200 - $925.00
The Classic 200 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B
|
|

|
CLASSIC 250 - $1050.00
The Classic 250 MPPT Charge Controller - Listed by ETL for US & Canada CE Certified FCC Class B
|
|

|
MNBIRDHOUSE1-RED - $425.00
Birdhouse - Emergency Disconnect Switch. Meets 2014 NEC Rapid system shut down requirements.
|
|

|
MNBIRDHOUSE1-GRAY - $425.00
Birdhouse - Emergency Disconnect Switch. Meets 2014 NEC Rapid system shut down requirements.
|
|

|
MNSPD-300-DC - $125.00
The MidNite Solar 300V Surge Protector Device (MNSPD) is a Type 2 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.
|
|

|
MNBE-D - $850.00
Our Best Value! Battery Enclosure with locking door and two shelves. MNBE-D holds 8 GVX3050T or 8 golf cart or 8 group 31 batteries. With the optional third shelf, the MNBE-D holds 12 group 31 batteries.
|
|

|
MNESMAXW-SHORT BP - $239.00
SMA and XW short back plate for inverter and E-Panel.
|
|

|
MNBCM - $79.00
Battery Capacity Meter
|
|

|
MNEDC 5A thru 100A
5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100 amp 150VDC Panel Mount. 10,000 AIC
|
|

|
MNEPV 1A thru 63A
150VDC din rail mount breaker available in 1 to 63 amps (13mm wide).
|
|

|
MNEPV-300 7A thru 50A
7, 10, 12, 15, 20, 30, 50 amp 300VDC din rail mount breaker. 10,000 AIC
Note: Branch circuit rated 489A
|
|

|
MNEDC-300 30A thru 80A
30, 60 or 80 Amp 300 VDC panel mount breaker. 10,000 AIC
|
|

|
MNBCB 1000/50 - $850.00
MidNite 1000amp Battery combiner box. Useful for dual Radian inverters or multiple Sunny Island inverters as well as for combining multiple strings of batteries.
|
|

|
MNXFLEX2/0
2/0 Cobra X-Flex battery cable with tin plated lugs and glue filled white or red heat shrink. UL Listed.
|
|

|
MNXFLEX4/0
4/0 Cobra X-Flex battery cable with tin plated lugs and glue filled white or red heat shrink. UL Listed.
|
|

|
MNXFLEX2AWG
2 AWG Black UL Listed Cobra X-Flex battery cable.
|
|