Small Breaker Boxes
MNEPV-300 7A thru 50A
POLARIZED
MNEPV7-300, MNEPV10-300, MNEPV12,-300 MNEPV15-300, MNEPV20-300, MNEPV50-300
MNEPV7-300, MNEPV10-300, MNEPV12,-300 MNEPV15-300, MNEPV20-300, MNEPV50-300
Model
|
Price
|
Size
|
Weight
|
MNEPV-300 7A thru 50A
|
$46.00
|
Width 1 inch (26mm) Wire size 14 to 6 AWG
|
1.5 lbs
|
Model
|
MNEPV-300 7A thru 50A
|
Price
|
$46.00
|
Size
|
Width 1 inch (26mm) Wire size 14 to 6 AWG
|
Weight
|
1.5 lbs
|
DESCRIPTION:
300VDC din rail mount breaker.
10,000 AIC
10,000 AIC
Note: Branch circuit rated 489A
MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
MNEPV breakers are the same as CBI QY breakers except the standard used is inadequate for the solar industry. MidNite breakers have been evaluated by ETL to 300VDC and are listed for US and Canada. All of the NRTL listings still apply. Breakers ordered under the CBI part numbering system will not be listed for 300VDC and in many cases are not suitable for the solar industry.
Read about the 165 VDC ETL TEST STORY
MNEPV30-300 is discontinued and replaced with MNEPV30-300-1PNP
Breaker Torque Value: 20 In-Lbs (2.3NM)
All MidNite circuit breakers hold 100% rated current independent of ambient temperature.
MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
MNEPV breakers are the same as CBI QY breakers except the standard used is inadequate for the solar industry. MidNite breakers have been evaluated by ETL to 300VDC and are listed for US and Canada. All of the NRTL listings still apply. Breakers ordered under the CBI part numbering system will not be listed for 300VDC and in many cases are not suitable for the solar industry.
Read about the 165 VDC ETL TEST STORY
MNEPV30-300 is discontinued and replaced with MNEPV30-300-1PNP
Breaker Torque Value: 20 In-Lbs (2.3NM)
All MidNite circuit breakers hold 100% rated current independent of ambient temperature.
- POLARIZED
- Environmental Rating - Type 1 (Indoor)
- Listed for US & Canada when used in MidNite Solar enclosures
- DC Voltage Rating - 300VDC
- Wire Size Range - 14 to 6 AWG
- Width - 1 inch (26mm)
- Number Of Poles - 2
- Warranty - 5 yrs
California Residents: Warning
ACCESSORIES
MNDC-C-SERIES - $262.00
This is a MNDC with adapter attached for the smaller panel mount breakers (3/4 inch MNEDC panel mount breaker not included).
This is a MNDC with adapter attached for the smaller panel mount breakers (3/4 inch MNEDC panel mount breaker not included).
MNDC125 - $310.00
White powder coated aluminum with 125A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum with 125A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC175 - $360.00
White powder coated aluminum chassis with 175A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum chassis with 175A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC250 - $360.00
White powder coated aluminum chassis with 250A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
White powder coated aluminum chassis with 250A/125VDC breaker and 5 dinrail breaker slots or 3 panel mount breaker slots.
MNDC125PLUS - $380.00
MNDC Plus version of the popular MNDC
MNDC Plus version of the popular MNDC
MNDC175PLUS - $425.00
MNDC Plus version of the popular MNDC.
MNDC Plus version of the popular MNDC.
MNDC250PLUS - $425.00
MNDC Plus version of the popular MNDC.
MNDC Plus version of the popular MNDC.
MNDC175-X2 - $740.00
MNDC175-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 175A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC175-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 175A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC250-X2 - $740.00
MNDC250-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 250A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNDC250-X2 utilizes the MidNite E-Panel enclosure. The door is blank. There are large 250A/125VDC battery breakers out each side for disconnecting two sources or loads.
MNBABYBOX - $59.00
General use powder coated aluminum enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution.
General use powder coated aluminum enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution.
MNBIGBABY - $71.00
General use enclosure - holds up to 4 13mm wide din rail breakers from 1-63 amps.
General use enclosure - holds up to 4 13mm wide din rail breakers from 1-63 amps.