|
|
|
Model
|
Price |
Size |
Shipping |
Weight |
|
MNSI6048-CL150
|
$4920.00 |
50" T x 26.75" W x 11.5" D |
1 Crate, 56" L x 28" W x 19" D "truck freight only" |
Actual-225, Shipping-300 Lbs |
|
MODEL OPTIONS
|
Model
|
Price |
Size |
Shipping |
Weight |
|
MNSI6048-CL200-RSS
|
$5,190.00
|
|
|
|
The MNSI6048-CL200-RSS is a Rapid Shut down compliant upgrade of this model.
The RSS Upgrade includes:
- RT main DC breaker (125, 175 or 250 amp depending on E-Panel)
- A MNBDM (to control the main breaker)
- A MNEPV5 DC breaker to protect the wire and MNBDM
- Full function testing of the rapid shut down.
- NOTE: the Birdhouse, Combiners and Cat-5 cable are sold separately.
|
|
MNSI6048-CL200
|
$4,941.00
|
|
|
|
|
With Classic 200 and high voltage input breakers instead of a Classic 150
|
|
MNSI6048-CL250
|
$5,141.00
|
|
|
|
|
With Classic 250 and high voltage input breakers instead of a Classic 150
|
|
MNSI6048-2CL150
|
$6,034.00
|
|
|
|
|
Two Classic 150 Charge Controllers, mounting bracket, SPD300, 2 DC breakers and wiring
|
|
MNSI6048-2CL200
|
$6,076.00
|
|
|
|
|
Two Classic 200 Charge Controllers, mounting bracket, SPD300, 2 high voltage DC breakers and wiring.
|
|
MNSI6048-2CL250
|
$5,476.00
|
|
|
|
|
Two Classic 250 Charge Controllers, mounting bracket, SPD300, 2 high voltage DC breakers and wiring.
|
|
|
|
MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts. This system uses the SMA Sunny Island inverter that is rated at 6,000 watts and uses a 48 volt battery. It produces 120 volts AC and has a single AC input. MidNite does offer an automatic transfer relay that can be installed in the E-panel that will allow the Sunny Island to automatically select between two AC inputs (For example the grid or generator). Dont forget to look at our other products that compliment the pre-wired inverter system like our Battery Boxes or Disconnecting Combiners. Our pre wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Please contact us for a quote if the System you need is not listed. Below is a simple list of the major components included in the system.
FEATURES:
- Environmental Rating - Type 1 (Indoor)
- SMA Sunny Island Pre-Wired 6048 120 vac Inverter for
Off Grid or Battery based Grid tie
- MNE250SMA E-Panel
- AC Bypass Assembly
- Classic 150 charge controller with DC-GFP (Ground Fault protection) and Arc Fault protection built in.
- Two MNSPD300's (Surge Protection Devices)
- 250 amp Battery Main Breaker for the Sunny Island
- SMA Sunny Island is New Old Stock and comes with a 1 year warranty by MidNite.
- Listed by ETL for US & Canada
- MidNite E-Panel, Classic Charge Contoller and SPD's made in the USA
- SMA Sunny Island Inverter made in Germany
- General labor for assembly, test and crating included
Truck Freight Only
NOTE: MidNite does not warranty SMA components.
California Residents: Warning
We DO NOT accept returns on Pre-Wired systems, battery cables or custom built equipment.
|
|
Description:
|
SMA Sunny Island 6048 120 vac Inverter.
AC Bypass assembly included
6000 watt 48 volt inverter.
Classic 150.
|
|
|
Recommended Accessories
|
|
MNBCM - $79.00
Battery Capacity Meter
|
|
|
MNBIRDHOUSE1-RED - $425.00
Birdhouse - Emergency Disconnect Switch. Meets 2014 NEC Rapid system shut down requirements.
|
|
|
MNBIRDHOUSE1-GRAY - $425.00
Birdhouse - Emergency Disconnect Switch. Meets 2014 NEC Rapid system shut down requirements.
|
|
|
MNSPD-300-DC - $135.00
The MidNite Solar 300V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.
|
|
|
MNSPD-300-AC - $135.00
The MidNite Solar 300V AC Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for 120 VAC and 120/240 VAC circuits.
|
|
|
MNSPD-600 - $135.00
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.
|
|
|
MNBE-D - $850.00
Our Best Value! Battery Enclosure with locking door and two shelves. MNBE-D holds 8 GVX3050T or 8 golf cart or 8 group 31 batteries. With the optional third shelf, the MNBE-D holds 12 group 31 batteries.
|
|
|
MNPV3 - $115.00
Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV)
breakers or two 600 VDC fuse holders.
|
|
|
MNPV6 - $144.00
Gray aluminum type 3R rainproof enclosure with insulating dead front, will accept six 150VDC breakers or 4 600VDC fuse holders.
|
|
|
MNPV6-250 - $154.00
Gray aluminum type 3R rainproof enclosure with insulating dead front, will accept three 300 VDC MidNite Solar breakers.
|
|
|
MNPV6-Disco - $249.00
This 3R MNPV6 DISCO combiner is one in a series of disconnecting PV combiners from MidNite Solar. This model holds up to 6 poles of our common MNEPV and or MNEAC CBI breaker. This model will support several different configurations.
|
|
|
MNPV4HV-DISCO 3R-DLX - $619.00
Deluxe Disconnecting Combiner has 80 amp busbars, 100 amp load break rated switch and a third pole which is the feedback micro switch.
|
|
|
MNPV6HV-DISCO 4X - $849.00
MNPV6HV-DISCO 4X PV Disconnecting Combiner, 3 poles, 125 amp busbars, 100 amp load break rated switch.
|
|
|
MNPV4-MC4-LV - $350.00
This 3R pre-wired MNPV4-MC4-LV combiner is rated for outdoor use.
|
|
|
MNEDC 5A thru 100A - $22.00
5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100 amp 150VDC Panel Mount. 10,000 AIC
|
|
|
MNEPV 1A thru 63A - $18.00 ea or $200.00 12 pack
150VDC din rail mount breaker available in 1 to 63 amps (13mm wide).
|
|
|
MNSICOMM - $199.00
Converts the Classics Modbus into Canbus for the SMA giving the SMA system full control of the Classic.
|
|
|
MNCAT5-600 - $1.39 per ft.
Cat-5 cable to connect disconnecting combiners and arc fault combiners to the Birdhouse.
|
|
|
MNXFLEX2/0
2/0 Cobra X-Flex battery cable with tin plated lugs and glue filled white or red heat shrink. UL Listed.
|
|
|
MNXFLEX4/0
4/0 Cobra X-Flex battery cable with tin plated lugs and glue filled white or red heat shrink. UL Listed.
|
|
