QueueMarkerEvent
soln=BASFLO /cmd=DocCreated
soln=BASFLO /cmd=DocOpened
v14:Validation
<v14:Validation><v14:ValidationProperties ShowIgnored='0'/><v14:RuleSets><v14:RuleSet ID='1' NameU='Flowchart' Description='Verify that Flowchart shapes are connected properly.'><v14:Rule ID='1' NameU='UngluedConnector' Category='Connectivity' Description='Connector is not glued at both ends.'><v14:RuleFilter>ROLE()=1</v14:RuleFilter><v14:RuleTest>AND(AGGCOUNT(GLUEDSHAPES(4)) = 1, AGGCOUNT(GLUEDSHAPES(5)) = 1)</v14:RuleTest></v14:Rule><v14:Rule ID='2' NameU='StartWithoutTerminator' Category='Start / End' Description='Flowchart shape has no incoming connectors and is not a Start/End shape.'><v14:RuleFilter>AND(OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart")),NOT(OR(HASCATEGORY("Start/End"),STRSAME(LEFT(MASTERNAME(750),9),"Start/End"),STRSAME(LEFT(MASTERNAME(750),10),"Terminator"))))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(1)) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='3' NameU='EndWithoutTerminator' Category='Start / End' Description='Flowchart shape has no outgoing connectors and is not a Start/End shape.'><v14:RuleFilter>AND(OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart")),NOT(OR(HASCATEGORY("Start/End"),STRSAME(LEFT(MASTERNAME(750),9),"Start/End"),STRSAME(LEFT(MASTERNAME(750),10),"Terminator"))))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(2)) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='4' NameU='NoStartTerminator' Category='Start / End' Description='Flowchart does not start with a Start/End shape.' RuleTarget='1'><v14:RuleFilter>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "OR(HASCATEGORY(""Flowchart""),ONLAYER(""Flowchart""))")) &gt; 0</v14:RuleFilter><v14:RuleTest>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "AND(OR(HASCATEGORY(""Start/End""),STRSAME(LEFT(MASTERNAME(750),9),""Start/End""),STRSAME(LEFT(MASTERNAME(750),10),""Terminator"")),AGGCOUNT(CONNECTEDSHAPES(2))&gt;0)")) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='5' NameU='NoEndTerminator' Category='Start / End' Description='Flowchart does not end with a Start/End shape.' RuleTarget='1'><v14:RuleFilter>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "OR(HASCATEGORY(""Flowchart""),ONLAYER(""Flowchart""))")) &gt; 0</v14:RuleFilter><v14:RuleTest>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "AND(OR(HASCATEGORY(""Start/End""),STRSAME(LEFT(MASTERNAME(750),9),""Start/End""),STRSAME(LEFT(MASTERNAME(750),10),""Terminator"")),AGGCOUNT(CONNECTEDSHAPES(1))&gt;0)")) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='6' NameU='UnconnectedShape' Category='Connectivity' Description='Flowchart shape is not connected to any other shape.'><v14:RuleFilter>OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart"))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(CONNECTEDSHAPES(0)) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='7' NameU='TerminatorInMiddle' Category='Connectivity' Description='Start/End shape has both incoming and outgoing connectors.'><v14:RuleFilter>OR(HASCATEGORY("Start/End"),STRSAME(LEFT(MASTERNAME(750),9),"Start/End"),STRSAME(LEFT(MASTERNAME(750),10),"Terminator"))</v14:RuleFilter><v14:RuleTest>NOT(AND(AGGCOUNT(CONNECTEDSHAPES(1))&gt;0,AGGCOUNT(CONNECTEDSHAPES(2))&gt;0))</v14:RuleTest></v14:Rule><v14:Rule ID='8' NameU='TooFewOutConns' Category='Connectivity' Description='Decision shape should have more than one outgoing connector.'><v14:RuleFilter>OR(HASCATEGORY("Decision"),STRSAME(LEFT(MASTERNAME(750),8),"Decision"))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(2)) &gt; 1</v14:RuleTest></v14:Rule><v14:Rule ID='9' NameU='NonFlowchartShape' Category='Connectivity' Description='Connected shape is not recognized as a Flowchart shape.'><v14:RuleFilter>NOT(OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart")))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(0)) = 0</v14:RuleTest></v14:Rule><v14:Rule ID='10' NameU='NoShapeText' Category='Text' Description='Flowchart shape has no text label.'><v14:RuleFilter>OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart"))</v14:RuleFilter><v14:RuleTest>NOT(STRSAME(SHAPETEXT(TheText), ""))</v14:RuleTest></v14:Rule><v14:Rule ID='11' NameU='OutsideCFF' Category='Cross - Functional' Description='Flowchart shapes should belong to a Swimlane.' RuleTarget='1'><v14:RuleFilter
>AGGCOUNT(FILTERSET(SHAPESONPAGE(),"HASCATEGORY(""Swimlane"")"))&gt;0</v14:RuleFilter><v14:RuleTest>AGGCOUNT(FILTERSET(SHAPESONPAGE(),"AND(OR(HASCATEGORY(""Flowchart""),ONLAYER(""Flowchart"")),AGGCOUNT(FILTERSET(PARENTCONTAINERS(),""HASCATEGORY(""""Swimlane"""")""))=0)"))=0</v14:RuleTest></v14:Rule></v14:RuleSet></v14:RuleSets></v14:Validation>
xmlns:v14
http://schemas.microsoft.com/office/visio/2010/extension
Board,Terminal,Devices,Connectors,strip,electromechanical,circuit,terminals
Drag the shape onto the drawing page.
Terminal board or terminal strip.
Reposition Text
This connector automatically routes between the shapes it connects.
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\BASFLO_U.VSS
C:\Program Files (x86)\Microsoft Office\Office14\visio content\1033\XFUNC_U.VSS
Arial Unicode MS
Symbol
Wingdings
Calibri
SimSun
PMingLiU
MS PGothic
Dotum
Sylfaen
Estrangelo Edessa
Vrinda
Shruti
Mangal
Tunga
Sendnya
Raavi
Dhenu
Latha
Gautami
Cordia New
Arial
Malgun Gothic
Times New Roman
MS Farsi
Guide
TheDoc
Page-1
Gesture Format
CONTINUOUS
msvThemeColors
VC-TEXTSTYLE1
msvThemeEffects
DEFAULT LINE STYLE
msvThemeOrder
msvNoAutoConnect
Flow Normal
Connector
EE Normal
Fastener
Hidden detail
Terminal board
visDescription
visVersion
Label
Row_1
Dynamic connector
TextPosition
Red TBB.69
XShift
XLen
Fact
XMove
Detail
Dynamic connector.1131
Dynamic connector.1135
Dynamic connector.1137
Dynamic connector.1127
Dynamic connector.18046
Dynamic connector.394
SHORT BLUE TBB.1330