QueueMarkerEvent
soln=BASFLO /cmd=DocCreated
soln=BASFLO /cmd=DocOpened
v14:Validation
<v14:Validation><v14:ValidationProperties ShowIgnored='0'/><v14:RuleSets><v14:RuleSet ID='1' NameU='Flowchart' Description='Verify that Flowchart shapes are connected properly.'><v14:Rule ID='1' NameU='UngluedConnector' Category='Connectivity' Description='Connector is not glued at both ends.'><v14:RuleFilter>ROLE()=1</v14:RuleFilter><v14:RuleTest>AND(AGGCOUNT(GLUEDSHAPES(4)) = 1, AGGCOUNT(GLUEDSHAPES(5)) = 1)</v14:RuleTest></v14:Rule><v14:Rule ID='2' NameU='StartWithoutTerminator' Category='Start / End' Description='Flowchart shape has no incoming connectors and is not a Start/End shape.'><v14:RuleFilter>AND(OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart")),NOT(OR(HASCATEGORY("Start/End"),STRSAME(LEFT(MASTERNAME(750),9),"Start/End"),STRSAME(LEFT(MASTERNAME(750),10),"Terminator"))))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(1)) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='3' NameU='EndWithoutTerminator' Category='Start / End' Description='Flowchart shape has no outgoing connectors and is not a Start/End shape.'><v14:RuleFilter>AND(OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart")),NOT(OR(HASCATEGORY("Start/End"),STRSAME(LEFT(MASTERNAME(750),9),"Start/End"),STRSAME(LEFT(MASTERNAME(750),10),"Terminator"))))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(2)) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='4' NameU='NoStartTerminator' Category='Start / End' Description='Flowchart does not start with a Start/End shape.' RuleTarget='1'><v14:RuleFilter>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "OR(HASCATEGORY(""Flowchart""),ONLAYER(""Flowchart""))")) &gt; 0</v14:RuleFilter><v14:RuleTest>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "AND(OR(HASCATEGORY(""Start/End""),STRSAME(LEFT(MASTERNAME(750),9),""Start/End""),STRSAME(LEFT(MASTERNAME(750),10),""Terminator"")),AGGCOUNT(CONNECTEDSHAPES(2))&gt;0)")) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='5' NameU='NoEndTerminator' Category='Start / End' Description='Flowchart does not end with a Start/End shape.' RuleTarget='1'><v14:RuleFilter>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "OR(HASCATEGORY(""Flowchart""),ONLAYER(""Flowchart""))")) &gt; 0</v14:RuleFilter><v14:RuleTest>AGGCOUNT(FILTERSET(SHAPESONPAGE(), "AND(OR(HASCATEGORY(""Start/End""),STRSAME(LEFT(MASTERNAME(750),9),""Start/End""),STRSAME(LEFT(MASTERNAME(750),10),""Terminator"")),AGGCOUNT(CONNECTEDSHAPES(1))&gt;0)")) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='6' NameU='UnconnectedShape' Category='Connectivity' Description='Flowchart shape is not connected to any other shape.'><v14:RuleFilter>OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart"))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(CONNECTEDSHAPES(0)) &gt; 0</v14:RuleTest></v14:Rule><v14:Rule ID='7' NameU='TerminatorInMiddle' Category='Connectivity' Description='Start/End shape has both incoming and outgoing connectors.'><v14:RuleFilter>OR(HASCATEGORY("Start/End"),STRSAME(LEFT(MASTERNAME(750),9),"Start/End"),STRSAME(LEFT(MASTERNAME(750),10),"Terminator"))</v14:RuleFilter><v14:RuleTest>NOT(AND(AGGCOUNT(CONNECTEDSHAPES(1))&gt;0,AGGCOUNT(CONNECTEDSHAPES(2))&gt;0))</v14:RuleTest></v14:Rule><v14:Rule ID='8' NameU='TooFewOutConns' Category='Connectivity' Description='Decision shape should have more than one outgoing connector.'><v14:RuleFilter>OR(HASCATEGORY("Decision"),STRSAME(LEFT(MASTERNAME(750),8),"Decision"))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(2)) &gt; 1</v14:RuleTest></v14:Rule><v14:Rule ID='9' NameU='NonFlowchartShape' Category='Connectivity' Description='Connected shape is not recognized as a Flowchart shape.'><v14:RuleFilter>NOT(OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart")))</v14:RuleFilter><v14:RuleTest>AGGCOUNT(GLUEDSHAPES(0)) = 0</v14:RuleTest></v14:Rule><v14:Rule ID='10' NameU='NoShapeText' Category='Text' Description='Flowchart shape has no text label.'><v14:RuleFilter>OR(HASCATEGORY("Flowchart"),ONLAYER("Flowchart"))</v14:RuleFilter><v14:RuleTest>NOT(STRSAME(SHAPETEXT(TheText), ""))</v14:RuleTest></v14:Rule><v14:Rule ID='11' NameU='OutsideCFF' Category='Cross - Functional' Description='Flowchart shapes should belong to a Swimlane.' RuleTarget='1'><v14:RuleFilter
>AGGCOUNT(FILTERSET(SHAPESONPAGE(),"HASCATEGORY(""Swimlane"")"))&gt;0</v14:RuleFilter><v14:RuleTest>AGGCOUNT(FILTERSET(SHAPESONPAGE(),"AND(OR(HASCATEGORY(""Flowchart""),ONLAYER(""Flowchart"")),AGGCOUNT(FILTERSET(PARENTCONTAINERS(),""HASCATEGORY(""""Swimlane"""")""))=0)"))=0</v14:RuleTest></v14:Rule></v14:RuleSet></v14:RuleSets></v14:Validation>
xmlns:v14
http://schemas.microsoft.com/office/visio/2010/extension
"
Reposition Text
_&Resize With Handles
_Hide H&idden Detail
_Simp&lified
This connector automatically routes between the shapes it connects.
Arial Unicode MS
Symbol
Wingdings
Calibri
SimSun
PMingLiU
MS PGothic
Dotum
Sylfaen
Estrangelo Edessa
Vrinda
Shruti
Mangal
Tunga
Sendnya
Raavi
Dhenu
Latha
Gautami
Cordia New
Arial
Malgun Gothic
Times New Roman
MS Farsi
Guide
TheDoc
Page-1
Gesture Format
Fastener
msvThemeColors
Hidden detail
msvThemeEffects
AskOnDrop
msvThemeOrder
msvNoAutoConnect
Flow Normal
Connector
Fillister top
Row_1
Row_2
Row_3
Row_4
Row_5
Thread
Diameter
Detail
MThread
SetOnDrop
MWidth
Sizing
AntiScale
HasText
visVersion
Fillister top.2141
Fillister top.2144
Fillister top.2147
Dynamic connector
TextPosition
Dynamic connector.66
Dynamic connector.67
Dynamic connector.68
Dynamic connector.69
Dynamic connector.71
Dynamic connector.72
Dynamic connector.73
Dynamic connector.74
Dynamic connector.81
Dynamic connector.82
Dynamic connector.99
Dynamic connector.100
Dynamic connector.101