Product Categories

Accessories
Backup System Kits
Battery Accessories
Battery Enclosures
Breakers
Busbars
Charge Controllers - Brat
Charge Controllers - Classics
Charge Controllers - KID
Combiners
Combiners - AC Micro Inverter (Example - Enphase)
Combiners - Disconnecting
Combiners - Pre-Wired
E-Panel - Magnum PAE 120/240VAC
E-Panel - Magnum
E-Panel - Outback
E-Panel - Samlex
E-Panel - Schneider Conext SW
E-Panel - Schneider Electric XW
E-Panel - SMA
E-Panel - UltraLite - Use with Nottagutter
E-Panel Lite - For use with TraceSW, DR, RS etc.
Fuses/ Fuse Holders
Inverter Systems, Pre Wired - AC Coupled
Inverter Systems, Pre Wired - Grid Tie with Battery Backup
Inverter Systems, Pre Wired - Off Grid
Inverter Systems, Pre Wired - UPS (Backup Power)
Mini DC Disconnect
Nottagutter
RAPID-SHUTDOWN-SYSTEM-NEC-690.12
Small Breaker Boxes
Software
Surge Protection Devices
Transfer switches
Wind and Hydro Accessories

Inverter Systems, Pre Wired - AC Coupled

Back to Inverter Systems, Pre Wired - AC Coupled
Printer Friendly Version
Download High Resolution Image
MNSI6048-3PHASE
(SMA AC Coupled)
Model
Price Size Shipping Weight
MNSI6048-3PHASE
$26,519 50" T x 24" W x 11.5" D pr inverter 3 crates each being 56" L x 28" W x 19" D "truck freight only" (3 Crates 300lbs each) On the wall weight of complete system 675 Lbs
MODEL OPTIONS
Model
Price Size Shipping Weight
MNSI6048-3PHASE-RSS
$27,329.00
The MNSI6048-3PHASE-RSS is a Rapid Shut down compliant upgrade of this model. The RSS Upgrade includes:
  • RT main DC breaker (125, 175 or 250 amp depending on E-Panel)
  • A MNBDM (to control the main breaker)
  • A MNEPV5 DC breaker to protect the wire and MNBDM
  • Full function testing of the rapid shut down.
  • NOTE: the Birdhouse, Combiners and Cat-5 cable are sold separately.

MidNite Solar pre-wired inverter systems offer a turn key solution to installing a battery based inverter system, saving time in the field. With a pre-wired solution all of the confusion is taken out of selecting all the right parts. Hookup between inverters done with included wire and conduit. This system uses 3 of the SMA Sunny Island inverters that are rated at 6,000 watts each and uses a 48 volt battery. It produces 3 Phase AC and has a single AC input. Dont forget to look at our other products that compliment the pre-wired inverter system like our Battery Boxes or Disconnecting Combiners. Our pre wired systems can be configured in about any way needed with any of the common battery based inverters (except Outback). Please contact us for a quote if the System you need is not listed. Below is a simple list of the major components included in the system.

FEATURES:
  • Environmental Rating - Type 1 (Indoor)
  • Three SMA Sunny Islands Pre-Wired 6048s 120/240 vac Inverters for Off Grid or Battery based Grid tie
  • MNE250SMA-3PH MASTER - (E-Panel)
  • Two MNE250SMA-SLAVE - (E-Panels)
  • AC Bypass Assembly, 3Phase
  • Three MNSPD300's (Surge Protection Devices)
  • Three 250 amp Battery Main Breakers for the Sunny Islands
  • Warranty - 5 yrs.
  • Listed by ETL for US & Canada
  • MidNite E-Panel and SPD's made in the USA
  • SMA Sunny Island made in Germany
  • General labor for assembly, test and crating included
Truck Freight Only

NOTE: MidNite does not warranty SMA components.
Description: 3 SMA Sunny Island 6048 120 vac Inverters.
3 Phase AC Bypass assembly included
3 6000 watt 48 volt inverters.

Recommended Accessories


MNBIRDHOUSE1-RED - $425.00
Birdhouse - Emergency Disconnect Switch. Meets 2014 NEC Rapid system shut down requirements.


MNBIRDHOUSE1-GRAY - $425.00
Birdhouse - Emergency Disconnect Switch. Meets 2014 NEC Rapid system shut down requirements.


MNSPD-300-AC - $119.00
The MidNite Solar 300V AC Surge Protector Device (MNSPD) is a Type 2 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for 120 VAC and 120/240 VAC circuits.


MNSPD-600 - $119.00
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 2 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.


MNBE-8D2x2 BASIC - $1100.00
Battery Enclosure with locking door and one shelf. Holds four 8D batteries.


MNBE-C - $999.00
Battery Enclosure with locking door and three shelves. Holds twelve group 31 or sealed golf cart sized batteries and even the 14" tall PVX-3050T from Concorde.


MNBE-D - $739.00
Our Best Value! Battery Enclosure with locking door and two shelves. MNBE-D holds 8 GVX3050T or 8 golf cart or 8 group 31 batteries. With the optional third shelf, the MNBE-D holds 12 group 31 batteries.


MNBE-D3R - $949.00
Rain tight aluminum battery enclosure with locking door and two shelves. MNBE-D holds 8 PVX3050T or 8 golf cart or 8 group 31 batteries.


MNBCB 1000/50 - $700.00
MidNite 1000amp Battery combiner box. Useful for dual Radian inverters or multiple Sunny Island inverters as well as for combining multiple strings of batteries.


MNPV3 - $99.00
Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders.


MNPV6 - $119.00
Gray aluminum type 3R rainproof enclosure with insulating dead front, will accept six 150VDC breakers or 4 600VDC fuse holders.


MNPV6-Disco - $204.00
This 3R MNPV6 DISCO combiner is one in a series of disconnecting PV combiners from MidNite Solar. This model holds up to 6 poles of our common MNEPV and or MNEAC CBI breaker. This model will support several different configurations.


MNPV4HV-DISCO 3R-DLX - $589.00
Deluxe Disconnecting Combiner has 80 amp busbars, 100 amp load break rated switch and a third pole which is the feedback micro switch.


MNPV6HV-DISCO 4X - $799.00
MNPV6HV-DISCO 4X PV Disconnecting Combiner, 3 poles, 125 amp busbars, 100 amp load break rated switch.


MNPV8HV-DISCO 3R - $825.00
MNPV8HV-DISCO 3R PV Disconnecting Combiner, 5 poles, 80 or 160 amp busbars depending on how they are configured. Switch is a 100 amp load break rated or 175 amps load break rated depending on configuration.


MNPV8HV-DISCO 4X - $969.00
MNPV8HV Disco 4X PV Disconnecting Combiner, 5 poles, 80 or 160 amp busbars depending on how they are configured. Switch is 100 amp load break rated or 175 amps depending on configuration.


MNPV16HV-DISCO 4X - $1399.00
MNPV16HV DISCO 4X PV Disconnecting Combiner, 5 poles, 100 amp load break rated or 175 amps load break rated for busbars and switch.


MNPV8HV-DLTL 3R - $769.00
The MNPV8HV-DLTL 3R was specifically designed for the new dual channel MPPT on transformer-less inverters.


MNPV8HV-DLTL 4X - $869.00
The MNPV8HV-DLTL 4X was specifically designed for the new dual channel MPPT on the transformer-less inverters.


MNPV16HV-DLTL 4X - $1,149.00
The MNPVHV16-DLTL-4X was specifically designed for the new dual channel MPPT on the transformer-less inverters.


MNSOB3R-2P - $395.00
MNSOB3R-2P is a disconnect switch. It has a 2 channel switch that breaks both the positive and negative of a PV string to a Transformer-less inverter.


MNSOB3R-4P - $525.00
MNSOB3R-4P is a Disconnect switch. It has a 4 channel switch that breaks both the positive and negative of two isolated PV strings to a Transformer-less inverter.


MNSOB4X-2P - $558.00
MNSOB4X-2P is a Disconnect switch. It has a 2 channel switch that breaks both the positive and negative of a PV string to a Transformer-less inverter.


MNSOB4X-4P - $683.00
MNSOB4X-4P is a Disconnect switch. It has a 4 channel switch that breaks both the positive and negative of two isolated PV strings to a Transformer-less inverter.


MNEDC125RT - $54.00
125amp 125VDC Panel Mount Breaker, 1 inch wide AIC 10,000 at 125VDC


MNEDCRT 175A to 250A
175 or 250 amp breaker, 125VDC 3/8" studs 1.5" AIC 50,000 at 125VDC


MNEPV-600RT 16A thru 20A
16 or 20 Amp 600 VDC Din Rail mount breaker.


MNDC-GFP100RT-2P - $129.00
100 amp 150VDC panel mount Dual DC ground fault protector (NRTL listed breaker assy)


MNBDM - $99.00


MNCAT5-600 - $1.39 per ft.
Cat-5 cable to connect disconnecting combiners and arc fault combiners to the Birdhouse.


MNXFLEX2/0
2/0 Cobra X-Flex battery cable with tin plated lugs and glue filled white or red heat shrink. UL Listed.


MNXFLEX4/0
4/0 Cobra X-Flex battery cable with tin plated lugs and glue filled white or red heat shrink. UL Listed.

Product Search