The Pre-wired MNPV8 combiner is rated for outdoor use. Designed for combining high voltage strings using 10mm x 38mm fuses up to 200 amps total. The use of touch safe din rail mount fuse holders (MNTS
) and fuses
allow operation up to 600 Volts. The MNPV8 is rated for up to 200 amps.
- Type 1 environmental rating
- Fast, Convenient hook up with industry standard connectors.
- All aluminum powder coated housing that won't rust.
- Flip up cover that can stay in the open position during installation.
- 2 PV Negative bus bars with #6 and 1/0 connections.
- Chassis ground bus bar with #6 and 1/0 connections.
- Standard DIN rail with eight 30 amp touch safe fuse holders. 15 amp fuses included
- Tin plated copper bus bar that connect PV Plus outputs that can be set up as 8 strings or 2 strings of 4.
- Included dead front cover MNPV12DF snaps into place after wiring is complete for safety.
- Connectors for PV in and PV out on bottom, additional knockouts on bottom and sides.
- Top surface is available to bring conduit in from directly above the enclosure.