This kit provides all the necessary breakers and brackets to assemble your own Power
back up system. The /GEN versions have the extra
generator input transfer switch and AC inlet. Use these kits with our "B" or "C"
175 OR 250 amp breaker MUST SPECIFY BREAKER SIZE
AC ground bus bar
AC input and output terminal blocks for field wiring connections
GFCI outlet and associated 15 amp breaker wired
Two 15 amp and one 20 amp load circuit breakers
50 amp AC breakers (AC input disconnect and AC bypass switch)
500 amp/50mV shunt for connection of battery and inverter negatives with bat negative busbar
AC inlet for portable generator recessed on side for Large Backup Kit/gen models
50 amp utility/15 amp generator transfer switch on 120 VAC/gen models
50 amp utility/30 amp generator transfer switch on 240 VAC/gen models
Knockout spaces for four additional AC or DC breakers on non-gen models
This large backup kit provides all the necessary breakers and brackets to assemble your own Power
back up system.
MNBE-C - $1154.00
Battery Enclosure with locking door and three shelves. Holds twelve group 31 or sealed golf cart sized batteries and even the 14" tall PVX-3050T from Concorde.
MNBE-D - $799.00
Our Best Value! Battery Enclosure with locking door and two shelves. MNBE-D holds 8 GVX3050T or 8 golf cart or 8 group 31 batteries. With the optional third shelf, the MNBE-D holds 12 group 31 batteries.
MNSPD-300-DC - $119.00
The MidNite Solar 300V Surge Protector Device (MNSPD) is a Type 2 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.
MNSPD-600 - $119.00
The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 2 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.