MidNite Solar
17722 67th Ave NE
Arlington, WA 98223
Phone: 360.403.7207
Fax: 360.691.6862

Wind Products
Product: MNPV8HV-DISCO 4X
Price: $ 969.00

The MNPV8HV-Disco 4X's red handled is LOCKABLE IN THE OFF POSITION!
  • Convertible configuration (field configurable)
  • Eight strings combined for up to 160 Amps single 230 Amp/600V single pole disconnect)
  • 4 + 4 positive strings, separate PV+ and PV- for use with 2 inverters (2 pole 115 Amp disconnect)
  • Four strings positive, four strings minus for use with non-isolated inverters (2 pole 115 Amp disconnect)
  • Disconnect has built in shunt trip with positive feedback
  • Birdhouse compatible
  • Load Break Rated
  • Optional PV connected power supply
  • Optional AC connected power supply for redundancy
  • Type 4X aluminum enclosure (no rust, won't turn to dust)
  • 90o C connections
  • See thru deadfront & color coded busbar guards included
  • Fuseholders (MNTS) installed
  • 15a/600v fuses installed
  • Meets 2014 NEC 690.12
  • Warranty - 5 yrs.
  • Listed by ETL for US & Canada
  • Made in the USA
Hardware Includes:
  • One MNSPD-600 (Surge Protection Device)
  • Eleven 1/2" strain reliefs (MNSR-1000)
  • Eleven 1/2" LOCKNUTS
  • Seven HOLE PLUGS with Gaskets (MNHOLE PLUG 1/2)
  • One 10-32 X 7/8" BOLT
  • Two 10-32 X 3/8" FHP
  • Six 10-32 KEPS NUT
  • One TERMINAL PIN 18-22 AWG.
  • One TERMINAL PIN 10-12 AWG.
  • Two RING TERMINAL 10-12 AWG.
  • One BUSBAR, NEGATIVE OUT 2
  • One BUSBAR, POSITIVE OUT 2
  • One BLUE WRENCH (MNWRENCH)
The difference between the regular Disco combiner and the DLTL version is that the MNPV8HV-Disco-4X is made for a single 8 string inverter, two 4 string inverters or one 4 string transformerless where as the DLTL is set up for 4 strings in and 2 strings out for Dual MPPT on transformerless

MNPV8HV Assembly Instructions

Two Inverter Conversion
NON-Isolated Conversion
Parallel Conversion
Read PDF on the Discos - 11 MB

Description:
MNPV8HV Disco 4X PV Disconnecting Combiner, 5 poles, 80 or 160 amp busbars depending on how they are configured. Switch is 100 amp load break rated or 175 amps depending on configuration, 600 volt max.

Size: 19.5"L x 14.8"W x 5.8"D INCLUDING HANDLE
Box Size: 24"L x 19"W x 6"D
Weight: 18 Lb/s