MidNite Solar
17722 67th Ave NE
Arlington, WA 98223
Phone: 360.403.7207
Fax: 360.691.6862

E-Panel - SMA
Product: MNE250SMA-OG/AC DM
Price: $ 1250.00

Master E-Panel in a 9-12KW dual Sunny Island inverter system. The dual system can be off-grid, AC coupled, battery backup grid tie or battery backup.
NOTE: One Slave E-Panel and additional Sunny Island required.

This Master E-Panel in a dual Sunny Island inverter system includes:
  • Environmental Rating - Type 1 (Indoor)
  • 60amp, 120/240vac Output/Bypass system
  • Separate 60amp, 120/240vac AC input and output breakers for the master inverter
  • 2 Extra spaces on the face to the Left of the main battery breaker for the white bodied (MNEACQZD) CBI Din Rail breakers
  • 8 Extra spaces on the face to the Right of the main battery breaker for the black bodied (MNEAC or MNEPV) CBI Din Rail breakers
  • 4 Spaces on the left side and 6 spaces on the right side of the chassis for the Panel mount 3/4 inch breakers (MNEDC)
  • 250amp battery breaker with inverter cables
  • 500amp/50mV shunt (MNSHUNT)
  • Battery negative busbar
  • AC input and output busbars
  • Neutral and ground busbars
  • AC input and output wiring
  • All breakers are hydraulic-magnetic and rated for continuous duty
  • Space provided for 6 additional 1/2" wide din rail mount AC or DC breakers and up to 12 3/4" wide panel mount breakers
  • Knockouts located for battery cables
  • AC conduit connections
  • Warranty - 5 yrs.
  • Listed by ETL for US & Canada
  • Made in the USA
NOTE: A back plate (MNESMA-Short BP or MNESMA-Tall-BP) is recommended for the proper wiring alignment of the Sunny Island.

Description:
The MNE250SMA-OG/AC DM The Dual Master E-Panel works with 1 of the MNE250SMA-Slave E-Panel’s to create a 120/240 VAC AC coupled or Off Grid system. The MNE250SMA-OG/AC DM includes the 60amp, 120/240vac input/output bypass system. Terminals are provided for hookup to leg 2 from the Slave E-Panel. Comes with 250amp battery disconnect breaker and inverter cables. Pre-wired with AC input and output wiring for leg 1 (master) inverter. (One slave E-Panel is required for 120/240.)

Box Size: 28"L x 22"W x 15"D
Weight: 43 Lb/s